Redmi K30, POCO X2 TWRP Recovery Flashing Toolkit Working 100%
ROOTING POCO X2, REDMI K30/K30 5G
Steps to Flash TWRP
- DISABLE WINDOWS DRIVERS SIGNATURE ENFORCEMENT
Disabling Windows Drivers Signature Enforcement allows Xiaomi ADB Fastboot Drivers to be installed correctly.
- UNLOCK THE BOOTLOADER
Unlocking the MIUI bootloader is mandatory. Read the full guide here. This process will reset your phone. All your data will be lost. Unlocked already? Jump to the next step.
- INSTALL ADB FASTBOOT DRIVERS
Extract the Xiaomi ADB Fastboot Driver zip file (miui-ADB-Driver-Installer-v1.4.3.zip) and install it on your computer. Make sure you install it on C:adb.
- EXTRACT TWRP PACKAGE
Extract the downloaded TWRP package (zip) file. You are free to extract it anywhere but make sure all the files are in the same folder.
- ENABLE USB DEBUGGING
Enable USB Debugging on your phone through the Developer Options.
- Enable Developer Options:
Settings >> System >> About phone >> Tap the Build Number several times >> congratulation you are a developer.
Enable USB Debugging:
Settings >> System >> Developer Options >> enable the “USB Debugging” option.
- CONNECT THE PHONE TO A COMPUTER
Connect your phone to your computer using its USB cable. We recommend you to use USB 2.0 (black) instead of 3.0 (blue) port.
- RUN THE TWRP FLASHER TOOL
Right-click the TWRP Flasher Tool then choose Run As Administrator.
PRESS ANY KEY TO CONTINUE
How to Flash TWRP on Redmi K30 (Poco X2) 10
Now the main interface of the tool appears. Press any key on your keyboard to continue using the flasher tool.
- CHOOSE OPTION NO. 1
Type 1 on the keyboard then hit the Enter button.
- REBOOT TO BOOTLOADER MODE
Press any key again to continue. This will reboot your phone to Bootloader Mode (a.k.a Fastboot mode).
- WAIT FOR A PROPER REBOOT
Give the tool a few seconds to boot your phone into Bootloader mode.
- START THE FLASHING PROCESS
Once the phone is in Bootloader mode, the tool will detect it and automatically proceed to the flashing process. You don’t need to do anything. Just watch the magic happens.
- REBOOT THE PHONE
Once finished, press any key to continue. Your phone will reboot into the system.
Congratulation! You have flashed TWRP successfully on Redmi K30/K30 5G/Poco X2.
REBOOT INTO TWRP
- Turn off the phone completely.
- Press the Power button and Volume Up button simultaneously.
- Release once the phone vibrates.
- During your first time, you’ll need to do the “Swipe to allow modifications“. Without this, you’ll run TWRP in Read-only mode.